Specifications

PARAMETER 2
2-307
Classification
MACHINE
Display title
SPINDLE
Address Meaning Description
Speed attainment detection width
Program type M, E
Conditions Immediate
SA49
Unit %
Setting range 1 to 99
Set the speed attainment detection width. If a value other than 1-99 (%) is
set, the value will be regarded as 15 (%).
Spindle type
Program type M, E
Conditions At power on
SA50
Unit —
Setting range 0 to 8
Specify the type of spindle corresponding to the displayed SA parameters,
by the appropriate numeric value.
0: Axis not specified
1: No. 1 milling spindle
2: No. 1 turning spindle
3: No. 2 milling spindle
4: No. 2 turning spindle
5: No. 3 milling spindle
6: No. 3 turning spindle
7: No. 4 milling spindle
8: No. 4 turning spindle
Number of gears on spindle
Program type M, E
Conditions At power on
SA51
Unit —
Setting range 0 to 8
Set the number of gears on the spindle.
(1) For displaying a gear selection menu in manual operation mode
0, 5 to 8: Without gear
1: 2 gear positions (without neutral)
2: 2 gear positions (with neutral)
3: 3 gear positions (with neutral)
4: 4 gear positions (with neutral)
(2) For automatic gear selection with the MAZATROL program (only for
milling spindle)
Turning spindle type
Program type M, E
Conditions Immediate
SA52
Unit —
Setting range 0 to 2
0: Type not set.
1: C-axis type
2: Orientation type
Return to Library