Specifications

PARAMETER 2
2-363
Classification
DATA I/O
Display title
DNC
Address Meaning Description
—
Program type —
Conditions —
DNC22
to
DNC24
Unit —
Setting range —
Invalid
—
Program type M, E
Conditions At I/O startup
DNC25
Unit Bit
Setting range Binary, eight digits
Select the type of processing to be executed if
the tool quantity data within the NC memory
mismatches that which has been transferred
from the DNC memory.
0 : Issues an alarm if the tool quantity data
mismatches.
1 : Executes loading forcibly, even if the tool
quantity data mismatches.
Handling of tool data and tool files in the M
PLUS format
0 : Valid
1 : Invalid
—
Program type M, E
Conditions At I/O startup
DNC26
Unit Bit
Setting range Binary, eight digits
(1: Valid, 0: Invalid)
1: After program reception, a search is made for
the work number of that program.
1: Details of an alarm occurring in DNC are
displayed.
1: Loading of programs having the same work
number as that of the registered program in
NC becomes impossible.
1: The function of the PROGRAM LOCK/
ENABLE switch is released.
1: Three digit G-format and G10 format codes
input/output for MAZAK data transfer protocol
1: Binary to ASCII format input/output of MAZAK
data transfer protocol
1: All programs having work numbers smaller
than No. 9000 are erased at the start of
program reception.
Note:
When both bit 5 and bit 6 are set to 1 (enable), this functions for three digit
G-format and G10 format codes input/output.
7 6 5 4 3 2 1 0
7 6 5 4 3 2 1 0
Return to Library