Specifications

2 PARAMETER
2-36
Address
(bit)
Outline
L44 Selection of automatic setting on/off for nose position correction of a drilling tool
L45 Index table angle command
L46 Maximum number of pallets in pallet changing unit
L47 To prepare or not to prepare next pallet change
L48 Number of long boring bars
L49 Simultaneous operation of pallet change with ATC
L50 Rewriting of head number
L51 Tool command system in MDI operation
L52 Writing of machining management data with macro variable
L53 Showing of program number in PALLET MANAGEMENT display
L54 Selection of automatic operation mode
L55 Spindle load meter display type
L56 Method of measurement of coordinates by tool edge memorizing function (TEACH)
L57 Rewriting of tool data during automatic operation
L58 Head index angle indication system
L59 Input selection for HEAD OFFSET display
L60 Head quantity
L61 Output timing of AHC and APC
L62 Head relay point X1
L63 Head relay point Y1
L64 Head relay point X2
L65 Head relay point Y2
L66 Return/No return to head indexing point Z
L67 Length between the end surface of the spindle and the center of head rotation
L68 Head correction value X
L69 Head correction value Y
L70 Axis movement from machining face on escapement
Return to Library