Specifications

PARAMETER 2
2-37
Address
(bit)
Outline
L71 Shift of basic coordinate for oblique face machining
L72 —
L73 Time constant for shape coorection acceleration/deceleration filter 2
L74 Cutting feed rate for pre-interpolational acceleration/deceleration control
L75 Time constant for pre-interpolational linear control during cutting feed rate acceleration/deceleration
L76 Acceleration rate for high-speed cutting
L77 Angle for deceleration at corner before interpolation
L78 —
L79 In-position width for changeover of the synchronized-tapping gain
L80 —
L81 Fixed value (0)
L82
Table thickness
L83 Spindle head radius
L84 Correction value of alignment deviation X (Upper face)
L85 Correction value of alignment deviation Y (Upper face)
L86 Correction value of alignment deviation X (0-degree face)
L87 Correction value of alignment deviation Y (0-degree face)
L88 Correction value of alignment deviation X (90-degree face)
L89 Correction value of alignment deviation Y (90-degree face)
L90 Correction value of alignment deviation X (180-degree face)
L91 Correction value of alignment deviation Y (180-degree face)
L92 Correction value of alignment deviation X (270-degree face)
L93 Correction value of alignment deviation Y (270-degree face)
L94 - L97 —
L98 Max. tool length for laser tool length measurement
L99 Cycle time for saving the operational status management data
L100 - L105 —
Return to Library