Specifications

2 PARAMETER
2-40
Address
(bit)
Outline
L132 Acceleration/deceleration filter (2nd stage), G0 time constant
L133 - L138 —
L139 Minimum usable tool diameter of the measurable chamfering tool
L140 - L144 —
4. FEED VEL. (M)
Address
(bit)
Outline
M1 Rapid feed rate
M2 Feed rate for initial zero-point return
M3 Cutting feed rate limit
M4 Offset of machine coordinates system
M5 Second zero-point coordinating value
M6 Third zero-point coordinating value
M7 Fourth zero-point coordinating value
M8 Maximum software limit specified by manufacturer (+ direction)
M9 Maximum software limit specified by manufacturer (– direction)
M10 Command unit
M11 Coding of address of axis
M12 Coding of incremental axis
M13 Axis name (for display)
M14 Shifting distance of the watchdog-less home position
M15 Axis name (for axis name changing)
M16 Zero-point shift amount
M17 0 —
1 Unit of output from MCP to servo amplifier
2 Direction of machine zero-point return
3 Error correction schema with servo on
4 Type of axis
Return to Library