Specifications

2 PARAMETER
2-42
Address
(bit)
Outline
M21 0 Rapid-feed acceleration/deceleration type, Linear acceleration/deceleration
1 Rapid-feed acceleration/deceleration type, First-order lag
2 Rapid-feed acceleration/deceleration type, Second-order lag
3 Rapid-feed acceleration/deceleration type, Exponential acceleration/linear deceleration
4 Cutting-feed acceleration/deceleration type, Linear acceleration/deceleration
5 Cutting-feed acceleration/deceleration type. First-order lag
6 Cutting-feed acceleration/deceleration type, Second-order lag
7 Cutting-feed acceleration/deceleration type, Exponential acceleration/linear deceleration
M22 0 Deceleration time constant for rapid-feed exponential acceleration/linear deceleration
1 Type of stroke-end stop
2 Type of stroke-end stop
3—
4—
5—
6—
7—
M23 —
M24 —
M25 Upper limit of inclined Y-axis access inhibition area (Soft limit 3)
M26 Lower limit of inclined Y-axis access inhibition area (Soft limit 3)
M27 Optimum acceleration control: Target speed
M28 —
M29 Rapid feed clamping speed 1 for superposition control
M30 Rapid feed clamping speed 2 for superposition control
M31 Cutting feed clamping speed for superposition control
M32 Safety speed for Safety supervisory mode 2
M33 Safety speed for Safety supervisory mode 3
Return to Library