Specifications

PARAMETER 2
2-43
Address
(bit)
Outline
M34 Safety clamping speed for Safety supervisory mode 2
M35 Safety clamping speed for Safety supervisory mode 3
M36 Speed supervisory door selection
M37 Safety clamping speed reduction judgment coefficient
M38 Interference check distances for Intelligent Safety Shield, primary check distance
M39 Interference check distances for Intelligent Safety Shield, secondary check distance
M40 - M48 —
5. TIME CONST. (N)
Address
(bit)
Outline
N1 Rapid-feed time constant (linear acceleration/deceleration)
N2 Cutting-feed time constant (linear acceleration/deceleration)
N3 Rapid-feed time constant (First-order lag)
N4 Time constant for post-interpolation rapid feed acceleration/deceleration filter
N5 Cutting-feed time constant (First-order lag)
N6 —
N7 OT time
N8 Creeping speed during initial zero-point return
N9 Amount of grid ignorance during initial zero-point return
N10 Grid spacing
N11 —
N12 Rapid-feed backlash
N13 Cutting-feed backlash
N14 —
N15 Width to which the machine posture change correction is to be applied
N16 Machine posture change correction value
N17 Servo amplifier channel number
N18 Servo amplifier rotary switch number
Return to Library