Specifications

2 PARAMETER

2-46

7. SPINDLE (SA)

Address

(bit)

Outline

SA1 - SA8 Maximum RPM of spindle in each speed range (range 1 to 8)

SA9 - SA16 Constants for calculating each gear speed of the spindle (range 1 to 8)

SA17 - SA24 Maximum RPM of spindle during tapping cycle (range 1 to 8)

SA25 - SA32 Spindle speed during gear shifting (range 1 to 8)

SA33 - SA40 Acceleration/deceleration time constant for the synchronous tapping (range 1 to 8)

SA41 Spindle orientating speed

SA42 Minimum spindle speed

SA43 Channel number for the spindle amplifier

SA44 Spindle amplifier rotary switch number

SA45 0

Spindle speed range changing method, in relation to switching the torque factors for auto-pecking of the

cutting load detection type

Spindle speed range changing method, in relation to switching the torque factors for auto-pecking of the

cutting load detection type 2

2 Homing direction for synchronous tapping

3 Homing direction for synchronous tapping

4 Defines the specified direction as the Z-phase detection direction

5 Spindle index gear correction

6—

7—

SA46 0 Direction of orientation

1 Direction of orientation

2 C-axis position control changeover type

3 Synchronous tapping position control changeover type

4 Z-phase detection direction

5 C-axis homing direction

6 C-axis homing direction

7 Synchronous tapping command polarity

SA47 0 —

Return to Library