Specifications

PARAMETER 2

2-47

Address

(bit)

Outline

1—

—

6—

7 Considering/Ignoring the spindle/motor gear ratio

SA48 Encoder signal input destination

SA49 Speed attainment detection width

SA50 Spindle type

SA51 Number of gears on spindle

SA52 Turning spindle type

SA53 Spindle 1/4h (1/2h) rated torque for auto-pecking of the cutting load detection type — L coils

SA54

Spindle 1/4h (1/2h) rated torque for auto-pecking of the cutting load detection type — H coils

SA55 Spindle 1/4h (1/2h) rated torque for auto-pecking of the cutting load detection type — Spindle gear position 3

SA56 Spindle 1/4h (1/2h) rated torque for auto-pecking of the cutting load detection type — Spindle gear position 4

SA57 Spindle viscous friction coefficient “cms” for auto-pecking of the cutting load detection type — Range 1

SA58 Spindle viscous friction coefficient “cms” for auto-pecking of the cutting load detection type — Range 2

SA59 Spindle viscous friction coefficient “cms” for auto-pecking of the cutting load detection type — Range 3

SA60 Spindle viscous friction coefficient “cms” for auto-pecking of the cutting load detection type — Range 4

SA61 Spindle coulombic friction coefficient “fms” for auto-pecking of the cutting load detection type — Range 1

SA62 Spindle coulombic friction coefficient “fms” for auto-pecking of the cutting load detection type — Range 2

SA63 Spindle coulombic friction coefficient “fms” for auto-pecking of the cutting load detection type — Range 3

SA64 Spindle coulombic friction coefficient “fms” for auto-pecking of the cutting load detection type — Range 4

SA65 Cutting force calculation filter for auto-pecking of the cutting load detection type

SA66 Maximum permissible speed of the rotational axis for polygonal/hobbing machining

SA67 - SA73

Revolutions in the following spindle output diagrams:

MACHINING NAVIGATION-RESULT/MACHINING NAVIGATION-PPEDICTION/Monitoring Functions

Return to Library