Specifications

2 PARAMETER
2-50
8. BARRIER (BA)
Address
(bit)
Outline
BA1 Chuck outside diameter (for chuck barrier) — No. 1 turning spindle
BA2 Chuck width (for chuck barrier) — No. 1 turning spindle
BA3 Chuck inside diameter (for chuck barrier) — No. 1 turning spindle
BA4 EIA program workpiece outside diameter
BA5 Chuck outside diameter (for chuck barrier) — No. 2 turning spindle
BA6 Chuck width (for chuck barrier) — No. 2 turning spindle
BA7 Chuck inside diameter (for chuck barrier) — No. 2 turning spindle
BA8 Tail body outside diameter (for tail barrier)
BA9 Tail body length (for tail barrier)
BA10 Tail spindle outside diameter (for tail barrier)
BA11 Length with tail spindle at back end (for tail barrier)
BA12 Tail head outside diameter (for tail barrier)
BA13 Tail head length (for tail barrier)
BA14 Tail head taper angle (for tail barrier)
BA15 Tail head biting diameter (for tail barrier)
BA16 Tail barrier, tail extruding length
BA17 Tail barrier, workpiece length
BA18 Tail barrier, tail reversing position Z
BA19 Distance from the Z-axis machine zero point to the spindle edge — No. 1 turning spindle
BA20 Distance from the Z-axis machine zero point to the spindle edge — No. 2 turning spindle
BA21 Jaw number for EIA program barrier — No. 1 turning spindle
BA22 Jaw number for EIA program barrier — No. 2 turning spindle
BA23 Turret outline
BA24 Turret width
BA25 Turret reference position X
BA26 Turret reference position Z
Return to Library