Specifications

2 PARAMETER
2-52
Address
(bit)
Outline
BA54 Selection of work spindle for hobbing
BA55 Turning spindle number for polygonal machining (D1)
BA56 Turning spindle number for polygonal machining (D2)
BA57 Turning spindle number for polygonal machining (D3)
BA58 Turning spindle number for polygonal machining (D4)
BA59 Spindle forward rotation M-code for tapping cycle
BA60 Spindle reverse rotation M-code for tapping cycle
BA61 Amount of runout of the B-axis center
BA62 Amount of offset for the B-axis — spindle distance
BA63 Holder angle of angle tool holder
BA64 B-axis tool reference position X
BA65 B-axis tool reference position Z
BA66 Deceleration area Z
BA67 Measuring area Z
BA68 Deceleration area X
BA69 Measuring area X
BA70 Distance between the reference points on both turrets
BA71 System number to be used when argument L is omitted from G112
BA72 —
BA73 Barrier valid/invalid 1 (chuck, sub-chuck, tailstock)
BA74 Barrier valid/invalid 2 (Lower turret, work rest)
BA75 - BA78 Barrier setup turret reference position
BA79 - BA82 Barrier setup chuck reference position 1
BA83 - BA86 Barrier setup chuck reference position 2
BA87 - BA90 Tail barrier reference position
BA91 Distance from spindle edge to partition plate
BA92 Central position X when viewed from machine zero point
Return to Library