Specifications

PARAMETER 2
2-53
Address
(bit)
Outline
BA93 Upper/lower turret tool angle difference (HD1)
BA94 Upper/lower turret tool angle difference (HD2)
BA95 Tool nose measurement, sensor width along the X-axis
BA96 Tool nose measurement, sensor width along the Z-axis
BA97 Tool nose measurement, X-coordinate of the sensor’s reference point
BA98 Tool nose measurement, Y-coordinate of the sensor’s reference point
BA99 Tool nose measurement, Z-coordinate of the sensor’s reference point
BA100 Tool nose measurement, X-coordinate of the sensor’s reference point (for lower turret/HD2)
BA101 Tool nose measurement, Y-coordinate of the sensor’s reference point (for lower turret/HD2)
BA102 Tool nose measurement, Z-coordinate of the sensor’s reference point (for lower turret/HD2)
BA103 Tool nose measurement, sensor width along the X-axis (for lower turret/HD2)
BA104 Tool nose measurement, sensor width along the Z-axis (for lower turret/HD2)
BA105 Adjustment “FdT” for W-axis thrust hold
BA106 Dead zone
BA107 Filter
BA108 W-axis thrust hold droop
BA109 Offset amount (X) during automatic tool setting value calculation
BA110 Offset amount (Z) during automatic tool setting value calculation
BA111 Pre-interpolation acceleration/deceleration time constant for time constant changeover M-code (M881)
BA112 Pre-interpolation acceleration/deceleration time constant for time constant changeover M-code (M882)
BA113 Pre-interpolation acceleration/deceleration time constant for time constant changeover M-code (M883)
BA114 Pre-interpolation acceleration/deceleration time constant for time constant changeover M-code (M884)
BA115 Pre-interpolation acceleration/deceleration time constant for time constant changeover M-code (M885)
BA116 Pre-interpolation acceleration/deceleration time constant for time constant changeover M-code (M886)
BA117 -
BA124
—
BA125 0 EIA tailstock barrier, tailstock usage valid/invalid
1 Tailstock present/absent
Return to Library