Specifications

PARAMETER 2
2-63
Classification
USER
Display title
POINT
Address Meaning Description
Maximum diameter of holes machinable on
one drill
Program type M
Conditions Immediate
D8
Unit 1 mm/0.1 inch
Setting range 0 to 99
Maximum diameter of holes machinable on
two drills
Program type M
Conditions Immediate
D9
Unit 1 mm/0.1 inch
Setting range 0 to 99
Maximum diameter of holes machinable on
three drills
Program type M
Conditions Immediate
D10
Unit 1 mm/0.1 inch
Setting range 0 to 99
Element used to automatically set the number of drills which are
automatically developed according to the hole diameter of the drill unit
Through-hole/tap-prehole machining
overshoot
Program type M
Conditions Immediate
D11
Unit 0.1 mm/0.01 inch
Setting range 0 to 99
Element used to automatically set the hole-drilling, endmilling, and boring
depths during automatic tool development of inversed spot-facing,
tapping, back-boring, through-hole drilling, through-hole counter-boring,
and spot-faced tapping units
MPL005
DEPTH
DEPTH
D11
D11
Example:
SNo. TOOL NOM-φ No. HOLE-φ HOLE-DEP
1 CTR-DR 10. 10.
21.
←
(DEPTH +
D11
)
Note: See also parameter D30 for tapping units.
Number of drills
developed
Conditions
1 DIA ≤ D8
2 D8 < DIA ≤ D9
3 D9 < DIA ≤ D10
Alarm D10 < DIA
Return to Library