Specifications

2 PARAMETER
2-64
Classification
USER
Display title
POINT
Address Meaning Description
Stop-hole machining hole-bottom clearance
Program type M
Conditions Immediate
D12
Unit 0.1 mm/0.01 inch
Setting range 0 to 99
Element used to automatically set the hole-drilling depth during automatic
tool development of stop-hole counter-boring and stop-hole boring units
MPL006
DEPTH
D12
Example:
SNo. TOOL NOM-φ No. HOLE-φ HOLE-DEP
1 DRILL 10. 10.
19.
↑
(DEPTH – tool tip compensation – D12)
Note:
This parameter is invalid when the residual hole diameter is not 0.
Spot-machining hole diameter
(fixed value)
Program type M
Conditions Immediate
D13
Unit 1 mm/0.1 inch
Setting range 0 to 99
Hole diameter is automatically set during automatic tool development
when spot-chamfering is not to be performed.
MPL007
D13
Example:
SNo. TOOL NOM-φ No. HOLE-φ HOLE-DEP
1 CTR-DR 20.
10.
"
D13
Depth-of-cut setting element for drilling
(ALMINUM)
Program type M
Conditions Immediate
D14
Unit 0.1
Setting range 0 to 10
Depth-of-cut setting element for drilling
(except AL)
Program type M
Conditions Immediate
D15
Unit 0.1
Setting range 0 to 10
Element used to automatically set the depth-of-cut per drilling operation
during automatic tool development
HOLE-φ × D14 : when the material of the stock workpiece is AL
(aluminum) in article MAT. 6
HOLE-φ × D15 : when the material of the stock workpiece is other than
AL in article MAT. 6
Return to Library