Specifications
PARAMETER 2
2-65
Classification
USER
Display title
POINT
Address Meaning Description
Number of revolutions during dwell at hole
bottom for chamfering cutter or spot-
machining tool in chamfering cycle
Program type M
Conditions Immediate
D16
Unit 1 revolution
Setting range 0 to 9
Z-axis feed dwell time at the hole bottom in the chamfering cycle of
chamfering cutter or spot-machining tool. Set this time in spindle
revolutions.
When the chamfering cutter reaches the
hole bottom, the Z-axis will firstly stop
moving until the spindle makes D16
revolutions, and then return to the
original position at the rapid feed rate.
Note:
This parameter is invalid for chamfering
with true-circle processing.
MPL008
Interference clearance of chamfering cutter
Program type M
Conditions Immediate
D17
Unit 0.1 mm/0.01 inch
Setting range 0 to 99
The clearance in order to prevent tool interference with a wall of the
workpiece or with the hole bottom during a chamfering cycle
MPL009
Interferes.
Interferes.
D17
D17
Return feed rate for reaming or boring
(cycle 3)
Program type M
Conditions Immediate
D18
Unit 100 mm/min / 10 inch/min
Setting range 0 to 9
The feed rate at which the tool is returned from the hole bottom during
reaming or boring.
MPL010
D18
Notes:
1. Valid only when the setting of DEPTH for the reamer (tool sequence)
is G01.
2. Valid only when the setting of PRE-DIA for the boring tool (tool
sequence) is CYCLE 3.
3. If this parameter is 0, the tool is returned at the same feed rate as that
of cutting.
Number of revolutions during dwell at hole
bottom for end milling
Program type M
Conditions Immediate
D19
Unit 1 revolution
Setting range 0 to 999
Z-axis feed dwell time at the hole bottom in an end milling cycle. Set this
time in spindle revolutions.
When the end mill reaches the hole
bottom, the Z-axis will firstly stop
moving until the spindle makes D19
revolutions, and then return to the
original position at the rapid feed rate.
Note:
This parameter is invalid for true-circle
processing.
MPL011
(Stops at hole bottom.)
(Stops at hole bottom.)
Return to Library