Specifications

2 PARAMETER
2-74
Classification
USER
Display title
POINT
Address Meaning Description
Reamer-prehole machining overshoot
Program type M
Conditions Immediate
D47
Unit 0.01 mm/0.001 inch
Setting range 0 to 999
Element used to automatically set the hole depth (HOLE-DEP) of drilling,
end milling and boring during automatic tool development of the reamer
unit
MPL025
DEPTH DEPTH
D47 D47
For drilling
For end milling or boring
Example:
SNo. TOOL NOM-
φ
No. HOLE-
φ
HOLE-DEP
1 DRILL 10. 10.
21.
←
(DEPTH +
D47
)
Feed override for the section to be
chamfered in the planetary tapping cycle
Program type M
Conditions Immediate
D48
Unit %
Setting range 0 to 999
Feed override for the section to be chamfered in the planetary tapping
cycle
Chamfering feed =
Pre-hole machining feed in tapping tool sequence × D48/100
Chamfering section
Amount of return at hole bottom during the
planetary tapping cycle
Program type M
Conditions Immediate
D49
Unit 0.1 thread
Setting range
0 to 999
The amount of return at hole bottom during the planetary tapping cycle
Specify data by the number of threads.
Amount of return = Tapping pitch ×
D49/10
A
mount of return
Auto-set feed rate for pre-hole machining
in the planetary tapping cycle
Program type M
Conditions Immediate
D50
Unit
0.01 mm/rev
0.001 inch/rev
Setting range 0 to 999
The feed rate for pre-hole machining will be auto-set to
D50 when the
planetary tapping cycle is selected.
SNo. TOOL NOM-
φ
No.HOLE-
φ
HOLE-DEP PRE-DIA PRE-DEP RGH DEPTH C-SP FR M M
1 TAP M10. 10. 23.7 PLANET 0.15 FIX P1.5 50 1.5
↑
D50
Return to Library