Specifications

PARAMETER 2
2-79
Classification
USER
Display title
POINT
Address Meaning Description
Learning of cutting conditions
(
DEP-Z range)
Program type M
Conditions Immediate
D73
to
D77
Unit 0.1% (0.1 mm/0.01 inch)
Setting range 0 to 1000
Specify
DEP-Z range for the end mill and the face mill from the learning
data of cutting conditions.
When learning data on the condition that
DEP-Z is in the following range
has been stored in the memory, learning is not effectuated again.
For a
DEP-Z range of the end mill, set a value of “DEPTH/NOM-φ” (at a
unit of 0.1%).
0
to D73.................. DEP-Z range (for end mill) 1
D73 to D74............. DEP-Z range (for end mill) 2
D74 to D75 ............. DEP-Z range (for end mill) 3
For a
DEP-Z range of the face mill, set a value of “DEPTH” (at a unit of
0.1 mm or 0.01 inch).
0 to
D76.................. DEP-Z range (for face mill) 1
D76 to D77............. DEP-Z range (for face mill) 2
Learning of cutting conditions
(
WID-R range)
Program type M
Conditions Immediate
D78
to
D82
Unit 0.1% (0.1 mm/0.01 inch)
Setting range 0 to 1000
Specify
WID-R range for the boring bar, back boring bar and end mill from
the learning data of cutting conditions.
When learning data on the condition that
WID-R is in the following range
has been stored in the memory, learning is not effectuated again.
For a
WID-R range of the boring bar and back boring bar, set a value of
“
DEPTH” (at a unit of 0.1 mm/0.01 inch).
0
to D78...................WID-R range (for boring bar and back boring bar) 1
D78 to D79..............WID-R range (for boring bar and back boring bar) 2
For a
WID-R range of the end mill, set a value of “DEPTH/NOM-φ” (at a
unit of 0.1%).
0
to D80...................WID-R range (for end mill) 1
D80 to D81..............WID-R range (for end mill) 2
D81 to D82..............WID-R range (for end mill) 3
—
Program type —
Conditions —
D83
to
D90
Unit —
Setting range —
Invalid
Return to Library