Specifications

2 PARAMETER
2-80
Classification
USER
Display title
POINT
Address Meaning Description
—
Program type M
Conditions Immediate
D91
Unit Bit
Setting range Binary, eight digits
(1: Execution, 0: No execution)
M04 is output after the tool has dwelled at the
hole bottom during a tapping cycle.
The tool dwells after M04 has been output at the
hole bottom during a tapping cycle.
The tool dwells after it has been returned to the
R-point during a tapping cycle.
If a drill is used in the pre-machining of the
centering drill cycle, the R-point height is set to
D1.
The finishing tool path is shortened during a true-
circle processing cycle (end milling).
The tool path is shortened during a true-circle
processing cycle (chamfering).
If a pre-machining tool sequence is included in
the same unit, the R-point height of the drill is set
to
D1 or D42.
The R-point height of the chamfering cutter during
the cycle 2 is set to
D42.
The R-point height of the spot-machining tool
during the chamfering cycle (cycle 2) is set to
D42.
—
Program type M
Conditions Immediate
D92
Unit Bit
Setting range Binary, eight digits
(1: Execution, 0: No execution)
During a true-circle processing (end milling) cycle,
E17 is used for axial feed.
The R1-point height of the back spot facing is set
to
D1.
If a chamfering cutter is included in the pre-
machining tool sequence of the same unit, the R-
point height of the reamer is set to
D1.
If a chamfering cutter is included in the pre-
machining tool sequence of the same unit, the R-
point height of the tapping is set to
D1.
During planetary tapping, chips are ejected
automatically prior to the threading process.
—
Program type M
Conditions Immediate
D93
Unit Bit
Setting range Binary, eight digits
Unidirectional positioning for point-machining
(1: Execution, 0: No execution)
CTR-DR (Spot-machining tool)
DRILL (Drill)
REAMER (Reamer)
TAP (Tap)
BCK FACE (Inversed spot-facing tool)
BOR BAR (Boring tool)
B-B BAR (Back-boring tool)
CHAMFER (Chamfering cutter)
7 6 5 4 3 2 1 0
7 6 5 4 3 2 1 0
7 6 5 4 3 2 1
0
Return to Library