Specifications

2 PARAMETER
2-82
2-3-3 User parameter LINE/FACE/3D (E)
Classification
USER
Display title
LINE/FACE/3D
Address Meaning Description
Closed-pattern cutting start point and
escape point setting element
Program type M
Conditions Immediate
E1
Unit 0.1 mm/0.01 inch
Setting range 0 to 999
Element used to set cutting start point and escape point for closed-pattern
line- or face-machining
Example:
Defined closed pattern
Defined closed
pattern
SRV-R
Cutting
start
p
oint
MPL026
Escape
p
oint
E1
E1
E2
E2
[Applicable units]
-
LINE OUT, LINE IN, CHMF OUT and CHMF IN
- Wall finishing of STEP, POCKET, PCKT MT and PCKT VLY
Cutting start point and escape point setting
element (the first clearance)
Program type M
Conditions Immediate
E2
Unit 0.1 mm/0.01 inch
Setting range 0 to 999
Element used to set the cutting start point and escape point for line- or
face-machining (the first clearance)
Example:
NOM-
φ/2 ≥ SRV-R
Escape point
SRV-R
Cutting
start
p
oint
E2
E2
NOM-φ/2 < SRV-R
Escape point
SRV-R
Cutting
start
p
oint
E2
E2
MPL027
[Applicable units]
- All line-machining units
- Face-machining units other than
FCE MILL, TOP EMIL, and SLOT
Notes:
1.
See the diagram of parameter E1 also.
2. Positioning of E2 at the escape point can be selected using E95, but
only for line-machining units.
Return to Library