Specifications

PARAMETER 2
2-85
Classification
USER
Display title
LINE/FACE/3D
Address Meaning Description
Axial interference clearance of chamfering
cutter
Program type M
Conditions Immediate
E11
Unit 0.1 mm/0.01 inch
Setting range 5 to 40
The amount of clearance that prevents interference of the chamfering
cutter with the bottom during chamfering
Interferes.
Interference depth
E11
MPL030
Radial interference clearance of face milling
unit and angular face milling unit
Program type M
Conditions Immediate
E12
Unit 0.1 mm/0.01 inch
Setting range 0 to 999
The amount of clearance that prevents interference between the tool and
the figure during face milling
Example:
MPL031
Defined figure
Escape point
Cutting
start point
E12E12
Tool path setting element for end milling-top
unit
Program type M
Conditions Immediate
E13
Unit 10%
Setting range 1 to 9
Element used to set the tool path internal to the figure for end milling-top
unit
Example:
MPL032
Defined figure
Tool diameter ×
E13
10
Tool diameter ×
E13
10
Depth-of-cut-R automatic setting element
(Pocket milling, Pocket milling-mountain,
Pocket milling-valley)
Program type M
Conditions Immediate
E14
Unit 10%
Setting range 0 to 9
Element used to automatically set the radial depth-of-cut (
WID-R) of the
tool sequence in
POCKET, PCKT MT or PCKT VLY unit
WID-R
=
NOM-
φ
×
E14
10
Example:
SNo. TOOL NOM-
φ
No. APRCH-X APRCH-Y TYPE ZFD DEP-Z WID-R
R1 END MILL 20. ? ? CW G01 10.
12.
↑
NOM-
φ
×
E14
10
Return to Library