Frequently Asked Questions

3. Now let’s begin to add camera 4 to camera 2 by repeater function.
Behind each camera, you will see a “+” sign. You can click the “+” on channel 2, then
choose “4”, and click “Apply”.
4. After you click “Apply”, it will tell you that “Setup successfully!” (Just like the picture
below)
Then please just wait 10 seconds, and click “OK” to leave this page. Now the repeater
function has been setup already.
How to test the hard drive on your PC
1.Right click the mouse on the desktop of your PC,navigate to Computer
Management(Local)>System Tool(at the left bar)>Device Management(at the left
bar),Find the “Disk drive” directory then check how many hard drives are detected by
your PC.
2.Power off your PC,unscrew and open the Main Unit of PC,find the 2 wires used to
connect to the hard disk,connect your hard drive to the Main Unit,power on the PC
again to go to “Device Management” on your computer again to check if this hard
drive can be recognized by your computer.