Information
December 2014 – Version 1.2 – Rechargeable Li-ion cells, modules or battery systems Page 3
4. HANDLING AND STORAGE
IMPORTANT NOTICE: The battery should not be opened without Saft approval. The battery should not be destroyed or
incinerated since the battery may cause fire or the ingredients contained in the cells could be harmful if exposed.
STORAGE : Store in a cool, dry and ventilated area. Elevated temperatures can shorten battery life. Since short circuit can
cause burn hazard, leakage or venting hazard, keep batteries in original packaging until use and do not jumble them.
HANDLING :
Do not short (+) and (-) terminal with conductors.
Do not short (-) terminal and the can of aluminium can cells with conductors
Do not short (+) terminal and the can of stainless steel can cells with conductors
Do not reverse the polarity
Do not mix different type batteries or mix new and old ones together.
Do not open the battery system or modules
Do not use the unit without its electronic management system.
Do not submit to excessive mechanical stress.
Do not expose the unit to water or condensation
Do not directly heat, do not solder or throw into fire. Such unsuitable use can cause leakage or spout vaporized
electrolyte fumes and may cause fire or explosion.
Immediately disconnect the batteries if, during operation, they emit an unusual smell, feel hot, change shape, or
appear abnormal in any other way. Contact Saft if any of these problems are observed.
CHARGING/DISCHARGING : Charge with charger designed specifically for this battery. Do not overcharge as venting and
combustion can occur. Do not over-discharge. Discharge limits are dependent on the specific product. Refer to Saft
Instructions.
5. PHYSICAL AND CHEMICAL PROPERTIES
The lithium-Ion cell or battery described by this Battery Information Sheet is a sealed unit when offered for sale. It is a
manufactured “article” and does not expose the user to hazardous chemicals when used in accordance with the
manufacturer specifications.
Boiling Point – Not applicable Melting Point – Not applicable
Vapor Pressure – Not applicable Vapor Density – Not applicable
Specific Gravity – Not applicable
6. STABILITY AND REACTIVITY – the battery system is stable when handled and stored according to
section 4
MATERIALS TO AVOID: Oxidizing agents, acids, bases and reducing agents.
CONDITIONS TO AVOID: Avoid exposing battery to fire or high temperature. Do not disassemble, crush or short or install
with incorrect polarity. Avoid mechanical or electrical abuse.
HAZARDOUS DECOMPOSITION PRODUCTS: Lithium hexafluorophosphate may react with water in the atmosphere and
produce some traces of hydrogen fluoride, which do not worsen the gas toxicity. Thermal decomposition of the cell may
release of electrolyte liquid and vapour, harmful materials, and dusts.