Operation Manual

Sagab by Elma

900

ENGLISH USER MANUAL

Safety

International safety symbols

Warning! Potential danger, comply with manual.

Caution! Dangerous voltage. Danger of electrical shock.

Double insulation.

Safety notes

• Please use utmost attention.

• Do not exceed the maximum allowable input range of any function.

• Insulated personnel body protective equipment up to 400V

Warnings

• In order to avoid electrical shock, the valid safety and VDE regulations regarding

excessive contact voltage must receive utmost attention, when working with

voltages exceeding 120V (60V) DC or 50V (25V) RMS AC. The values in brackets

are valid for limited ranges (as for example medicine and agriculture).

• Prior to measurements ensure that the test leads and the test instrument are in

perfect condition.

• When using this instrument only the handles of the probes may be touched. Do not

touch the probe tips.

• This instrument may only be used within the ranges specified and within low voltage

systems up to 400V.

• Prior to usage ensure perfect instruments function (e.g. on known voltage source).

• The voltage tester may no longer be used if one or several functions fail or if no

functionality is indicated.

• Do not use this instrument under damp conditions.

• Perfect display is only guaranteed within a temperature range of -10°C to +55°C at

relative humidity <85%.

• If the operators safety cannot be guaranteed, the instrument must be removed from

service and protected against use.

The safety can no longer be insured if the instrument:

• Shows obvious damage.

• Does not carry out the desires measurements.

• Has been stored for too long under unfavorable conditions.

• Has been subjected to mechanical stress during transport.

All relevant statutory regulations must be adhered to when using this instrument.