Instruction Manual

2
Before rst use
• Before using your Boss To Go milling
attachment for the rst time, remove any
packaging material and promotional labels.
• Be careful when handling the blades
as they are extremely sharp.
• Wash the cup, lid and blade assembly
in warm soapy water with a soft cloth.
Rinse and dry thoroughly.
Assembly
1. Remove blades and position the cup
with opening facing up.
2. Add ingredients avoiding lling past
the MAX line.
3. Fix the blade assembly in place with
a quarter turn in the clockwise direction.
Ensure the blade assembly collar is securely
in place before inverting the cup to blend.
Assembly
• Never blend hot (or even warm) ingredients.
The blades form a seal with the cup, and
there is no venting for steam to be released.
• We recommend not blending longer than
1 minute at a time. Ingredients in the cup
may become warm and cause internal
pressure on the seals making it dicult to
open or splatter ingredients when opened.
Allow to cool and take care when opening.
• The milling/grinding attachment is for use
with dry ingredients only.
• Hard ingredients such as cassia bark, star
anise, whole clove and dry corn kernels
should not be blended as they may damage
the blades.
• Do not mill/grind continuously for more than
30 seconds at a time. Allow the motor to rest
and the metal grinding attachment to cool
for 30 seconds before continuing.
• Run the blender only for the appropriate
amount of time required – do not over blend
ingredients.
• Ingredients can be pulsed by twisting the
cup to engage and disengage the motor as
needed. This will help ingredients circulate.
• Do not exceed the maximum mark when
adding foods into the cup.
• To stop blending at any time, rotate the cup
anti-clockwise to disengage the motor.
• The surface of the stainless steel grinding
cup may become too hot to touch if grinding
for longer than 30 seconds. Detach from
base by holding the plastic collar.
Hints & Tips