User Manual

7
OPERATING YOUR NEW APPLIANCE
Step 4:
Trimming the Dose
The adjustable Razor
™
Dose Trimming Tool
allows you to trim the puck to the right level for
a consistent extraction.
Select the correct width blade of the Razor
™
tomatchthediameterofyourlterbasket.The
Razor
™
has three blades of varying widths: 58mm,
54mm and 50mm. The 58mm and 54mm are
alreadyttedwithintheRazor
™
body. The 50mm
is separate.
If you require the 50mm blade, turn the adjustment
dial past #1 until the 54mm blade is fully extended
and able to be pulled from the body.
ADDITIONAL BLADE
54mm
50mm
If you require the 50mm blade, turn the Adjustable
Dial past #1 until the 54mm blade is fully extended
and able to be pulled from the body.
54mm
NOTE
The Adjustable Dial may feel tight as you
continue to wind it towards the end of its travel.
Insert the 50mm blade into the body. Wind the
Adjustable Dial until the blade is retracted past #4.
Press the 50mm and 58mm blades at the same
time, towards the centre of the body until a “click”
sound can be heard.
50mm
'CLICK'
APPLY PRESSURE
AT BOTH ENDS
Adjust the Razor
™
to the setting in the table below
for your Sage
®
espresso machine. This is a starting
point for your dose height.
Sage
®
Espresso
Machine
Portalter
Size
Dose
Height
Model name starting
with “SES9”
58mm
2
Model name starting
with “SES8”
54mm
2.5
Aftertampingthecoee,inserttheRazor
™
into
thelterbasketuntilitrestsontherimofthe
basket. The blade of the dosing tool should
penetratethesurfaceofthetampedcoee.
If the blade does not penetrate the surface of
thetampedcoee,yourcoeeisunderdosed.
Increasetheamountofdosedcoeebyadjusting
the GRIND TIME dial.
Rotate the Razor
™
back and forth while holding the
portalteronanangleovertheknockboxtotrimo
alittleexcesscoee.