the Citrus Press™ Pro SCP800
Contents 2 5 6 7 7 Important Safeguards Components Assembly Troubleshooting Care & Cleaning SAGE® RECOMMENDS SAFETY FIRST At Sage® we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.
• • • • • • • allowed to cool before cleaning, attempting to move or storing. Always turn the appliance to the off position, switch off at the power outlet and unplug at the power outlet when the appliance is not in use. Do not use the appliance if the power cord, plug, or appliance becomes damaged in any way. If damaged or maintenance other than cleaning is required, please contact Sage Customer Service or go to sageappliances.
concerning use of the appliance in a safe way and understand the hazards involved. • This appliance shall not be used by children. • Allow the motor to rest for 1 minute between each use. • Avoid placing hands or fingers near the hinge of the juice press arm when operating or moving the unit. The symbol shown indicates that this appliance should not be disposed of in normal household waste.
Components F A G H B I J C K D E A. B. C. D. E. F. Juice Press Arm Stainless Steel Filter (dishwasher safe) Motor ON/OFF Button (not shown) Cord Storage Soft Grip Handle G. Fruit Dome H. Die Cast Stainless Steel Juicing Cone (dishwasher safe). I. Juice Collector (dishwasher safe). J. Juice Spout K.
Assembly ASSEMBLING THE JUICER 1. Pull the juice press arm up, away from the motor base, until fully extended. 2. Place the juice collector onto the drive shaft on top of the motor base, ensuring the juice spout fits into the semi-circular groove at the front of the motor base. 3. Insert the filter into the juice collector, aligning the indent with arrow in the bottom of the filter over the corresponding tab with arrow in the juice collector. 6 4.
Troubleshooting Care & Cleaning • Always ensure that the juicer is turned OFF at the ON/OFF switch and the plug is removed from the power outlet before cleaning, disassembling, assembling and storing the appliance. • Follow these instructions to clean all surfaces or parts that come into contact with food during juicing. • For easy cleaning immediately after each use rinse removable parts under warm water to remove wet pulp. Allow parts to air dry before reassembling.
Sage® Freephone (UK Landline): 0808 178 1650 Mobile Calls (National Rate): 0333 0142 970 www.sageappliances.co.uk customerservice@sageappliances.co.uk What’s on your mind? Register your product and get more from your purchase Product registration takes only a few minutes and ensures a record of your purchase. Registration also makes it easier to get support and advice on any questions or issues that you might have in the future.
