the Nutri Juicer™ SJE410
CONTENTS 2 5 6 9 10 12 Important Safeguards Components Assembly Operation Care & cleaning Troubleshooting SAGE® RECOMMENDS SAFETY FIRST At Sage® we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.
WE RECOMMEND SAFETY FIRST • Always turn the appliance to the off position, switch off at the power outlet and unplug at the power outlet when the appliance is not in use. • Do not use the appliance if the power cord, plug, or appliance becomes damaged in any way. If damaged or maintenance other than cleaning is required, please contact Sage Customer Service or go to sageappliances.
WE RECOMMEND SAFETY FIRST • This appliance shall not be used by children. • Do not leave the appliance unattended when in use. • Allow the motor to rest for 1 minute between each use. • Do not push food into the feed chute with your fingers or other utensils. Always use the food pusher provided. Do not place hand or fingers into the food chute when it is attached to the appliance. • Do not juice stone fruit unless seeds and/or stones have been removed.
COMPONENTS A B C H I J D E K L F G A. Food pusher B. Unique Direct Central Feed System C. Extra wide 84mm feed chute D. Stainless steel titanium reinforced micro mesh filter basket E. Large capacity pulp container (dishwasher safe). F. Heavy duty 1200 watt motor G. Cord storage H. Interlocking safety arm Juicer cover (not dishwasher safe). J. Filter bowl surround (dishwasher safe). K. 1 litre juice jug and lid (dishwasher safe). L. 2 speed electronic control ON/OFF switch I.
ASSEMBLY BEFORE FIRST USE Before using your juicer for the first time, remove and safely discard any packaging materials and promotional stickers and labels. Ensure the appliance is switched off at the power outlet and the power cord is unplugged. Wash the filter bowl surround, filter basket, juicer cover, food pusher, pulp container and juice jug and lid in warm, soapy water with a soft cloth. Rinse and dry thoroughly. The motor base can be wiped with a damp cloth. Dry thoroughly. 1.
ASSEMBLY vertical position and locked into place on top of the juice cover. 6. Slide the food pusher down the food chute by aligning the groove in the food pusher, with the small protrusion on the inside of the top of the feed tube. tilting the motor base slightly to the right. Insert the pulp container under the juicer cover on the left hand side ensuring it is supported by the juicer cover and motor base.
OPERATION 1. Wash your selection of fruit and vegetables to be juiced. 2. Ensure the juicer is correctly assembled. Refer to Assembling your Sage® juicer. Ensure the juicer jug is placed under the juice spout and pulp container is in position before commencing juicing. 3. Plug the power cord into a 220–240V power outlet. Turn the power ON at the power outlet. Adjust the speed to the desired setting.
CARE & CLEANING Ensure the juicer is turned off by switching the ON/OFF button on the control panel to OFF. Then switch the appliance off at the power outlet and unplug the power cord. Ensure the juicer is correctly disassembled. Refer to Disassembling your new appliance. FOR EASIER CLEANING: • Clean as you go and avoid dried on juice or pulp residue. • Immediately after each use, rinse removable parts in hot water to remove wet pulp. Allow parts to air dry.
CARE & CLEANING REMOVING STUBBORN OR STRONG FOOD STAINS AND ODOURS Do not soak the stainless steel filter basket in bleach or other abrasive cleansers. Always treat the filter basket with care as it can be easily damaged. NOTE The stainless steel filter basket is dishwasher safe (top shelf only). CLEANING THE JUICE JUG • Rinse the juice jug and lid with froth attachment under running water. • Wash both parts in warm soapy water with a soft cloth. Rinse and dry thoroughly.
TROUBLESHOOTING POSSIBLE PROBLEM EASY SOLUTION Machine will not work when switched ON • The safety locking arm may not be correctly engaged in the vertical operating position with the locking arm located into the two grooves on either side of the juicer cover. Motor appears to stall when juicing • Wet pulp can build up under the juicer cover if the juicing action is too vigorous. Try slower juicing action by pushing the food pusher down more slowly.
TROUBLESHOOTING POSSIBLE PROBLEM EASY SOLUTION Pulp too wet and reduced extracted juice • Try a slower juicing action. Remove the stainless steel filter basket and thoroughly clean mesh walls with a cleaning brush. Rinse the filter basket under hot water. If the fine mesh holes are blocked, soak the basket in a solution of hot water with 10% lemon juice to unlock the holes or wash in the dishwasher. This will remove excess fibre build up (from fruit and vegetables) which could be inhibiting the flow.
Sage ® Freephone (UK Landline): 0808 178 1650 Mobile Calls (National Rate): 0333 0142 970 www.sageappliances.co.uk customerservice@sageappliances.co.uk What’s on your mind? Register your product and get more from your purchase Our constant aim is to improve the quality and features of our appliances. We welcome your comments and ideas in assisting our ongoing development. Product registration takes only a few minutes and ensures a record of your purchase.
