User Manual

TROUBLESHOOTING

POSSIBLE PROBLEM EASY SOLUTION

Pulp too wet and

reduced extracted juice

• Try a slower juicing action. Remove the stainless steel lter

basket and thoroughly clean mesh walls with a cleaning

brush. Rinse the lter basket under hot water. If the ne

mesh holes are blocked, soak the basket in a solution of hot

water with 10% lemon juice to unlock the holes or wash in

the dishwasher. This will remove excess bre build up (from

fruit and vegetables) which could be inhibiting the ow.

Juice leaks between the

rim of the Juicer and the

juicer cover

• Try a slower juicing speed and push the food pusher down

the feed chute more slowly.

• Ensure all parts are securely pieced together, with the

interlocking arm in place.

Juice sprays out

from spout

• The juice is being extracted too fast: try a slower juicing

speed and push the food pusher down the feed chute

more slowly.

Overheating with

excessive loads.

• The juicer is tted with a safety device which safeguards

against overheating with excessive loads. If overheating

occurs, the juicer will automatically activate the overload

protection device and the unit will switch itself o. When the

overload protection is activated, unplug the Juicer from the

power outlet for at least 15 minutes to allow the unit to cool.

Then plug the juicer into the power outlet and use as normal.

• It is important to ensure the juicer is turned on and the motor

is running prior to loading the chute. Do not put excessive

loads in the feed chute and ensure the lter basket is totally

clear of any food build up, on the blades and mesh, as this

can result in unnecessary resistance against the motor

resulting in overheating.

SJE410