User Manual

6
Assembly
BEFORE FIRST USE
Before using your juicer for the rst time,
remove and safely discard any packaging
materials and promotional stickers
and labels.
Ensure the power cord is unplugged.
Wash the lter bowl surround, lter basket,
juicer cover, food pusher, pulp container and
juice jug and lid in warm, soapy water with a
soft cloth. Rinse and dry thoroughly.
1. Place motor base on a at, dry surface
such as a countertop. Ensure that the
juicer is switched to OFF at the dial, and
the power cord is unplugged.
2. Place lter bowl surround on top of the
motor base.
3. Align the arrows at the base of the
stainless steel lter basket with the arrows
on the motor drive coupling and push
down until it clicks into place to create a
secure t with the motor base.
4. Place the juicer cover over the lter bowl
surround, positioning the lower part of
the feed chute over the stainless steel
lter basket.
5. Raise the safety locking arm up and
locate into the two grooves on either side
of the juicer cover.
6. The safety locking arm should now be in a
vertical position and locked into place on
top of the juicer cover.