User Manual

18
3. Remove the packaging from the lters
before tting. Keeping the new lters
straight, insert the right, then the left, into
the lter cavities and twist clockwise to
secure.
4. Slide the lter air guides over the top of
the lters so they sit straight. Push down
slightly to t.
5. Locate the lter reset button along the
upper, inner lip of the lter cavity and
press and hold for 3 seconds. The
‘Change Filter’ light will turn o when it is
reset. Replace the back panel.
IMPORTANT
On rst use, remove the lters as described
above and remove the lters stickers. If the
‘Change Filter’ light is not illuminated, do not
reset.
REPLACEMENT FILTERS
Replacement lters may be purchased from
the Sage website† or at participating retail
outlets.
Sage
FoodCycler™
Model No
Filter Replacement
Product Code
SWR550GRY SWR050BLK
†Delivery charges may apply.
Please contact Sage Customer Service
Centre for further support.
Only use the original Sage lter specially
intended for this appliance. Do not use any
other lter.