www.tuv.com 1.5 User Manual (Cover) BT HEADSET SAGEM H2 User Guide Test Report No.
www.tuv.com (Page 0) Contents BT HEADSET SAGEM H2……………..………………………………………….2 Getting Started………………..……………..………………………………………3 Charging Your Headset…………………………………………………………….4-5 Nominal Charging Time…………………………………………………………5 Talk & Standby Time………………………………………………………….5 Low Battery……………………………………………………………………...5 Turning Your Headset On and Off…………………………………………………….6 Pairing Your Headset………..
www.tuv.com (Page 1) BT HEADSET SAGEM H2 Fig. 1 Dual LED Ear Hook Volume + / - Multifunction Button(MFB) Earpiece Microphone Test Report No.
www.tuv.com Getting Started To use your BT HEADSET SAGEM H2 (“the headset”), please follow these simple steps: Charge your headset Pair your headset with a Bluetooth-enabled mobile handset Test Report No.
www.tuv.com Page 3 Charging Your Headset Fig. 4 The Headset comes with a built-in rechargeable battery. Prior to using the headset, it is recommendable to charge the battery fully for the first time. Page 5 Charging Your Headset Connect the charger to an AC wall outlet then plug into the Charger Adaptor and then go to the headset’s charging socket (fig.4). The LED will be red while charging.
www.tuv.com Page 6 Turning Your Headset On and Off Turning On the Headset Press and hold the MFB for 2 seconds until you hear a short beep. The LED will flash blue. IMPORTANT Press the MFB again each time you turn on the headset to reactivate pairing so that the connection between the headset and the mobile handset is resumed. For pairing, please refer to “Pairing Your Headset” on page 7-8. Turning Off the Headset Press and hold the MFB for 3 seconds until you hear a long beep. The LED flash stops.
www.tuv.com Page 7 Pairing Your Headset Prior to using your Headset for the first time, you must pair it with a Bluetooth-enabled mobile handset. The information on the next page describes pairing instruction for typical Bluetooth-enabled mobile handset. Headset pairing procedure is subject to different models of mobile handsets. Test Report No.
www.tuv.com Page 8 Pairing Your Headset 1. 2. 3. 4. 5. Place the headset and the mobile handset where they are easily viewable by no more than 1 meter apart. Ensure the headset is OFF. Press and hold the MFB until the headset LED alternately flashes blue and red. Activate your mobile handset’s Bluetooth function by referring to your mobile handset user guide for details.
www.tuv.com Page 9 Using Your Headset Answering a Call When there is an incoming call, you will hear ringing through the earphone. Press the MFB to accept the call or answer the call via your mobile handset in the normal way. Answering a Call when Listening to Stereo Audio Press the MFB once to answer the call and when finished, press the MFB once to resume stereo audio. Ending a Call Press the MFB to end your call or end the call via your mobile handset in the normal way.
www.tuv.com Page 10 Using Your Headset Voice Dialling from Your Headset If your mobile handset is equipped with a voice dialling function, simply press the MFB on your headset and when you hear a beep, say the voice tag. IMPORTANT Please make sure to record voice tag into the mobile handset first before using voice dialling function. Last Number Redialling from Your Headset Press the MFB on your headset twice.
www.tuv.com Page 11 Care and Maintenance Headset Consider turning your headset off before placing it in your pocket or bag. If the MFB is accidentally depressed, your mobile handset may place an unintended call. Do not expose the headset to liquid, moisture or humidity as it is not waterproof. Do not use abrasive cleaning solvents to clean the headset. Do not expose the headset to extremely high or low temperatures. Do not dispose of the headset in a fire as it will result in explosion.
www.tuv.com Page 12 Built-in Battery Do not attempt to replace the headset’s battery yourself as it is in-built and is not changeable. Charge the battery in accordance with the instruction supplied with this user guide. Only use the manufacturer supplied charger when charging the headset. Charging Only use the manufacturer supplied charger when charging the headset. Do not disassemble the charger as it may expose you to dangerous voltages of other risks.
www.tuv.com Page 13 Safety Information Check local laws regarding use of a mobile handset and headset while driving. If you use the headset while driving, ensure your attention and focus remains on your responsibility of driving safely. Never allow children to play with the headset – small parts may be a choking hazard. Observe all signs that require an electrical device or RF radio product to be switched off in designated areas.
www.tuv.com Page 14 Troubleshooting If you are unable to connect your headset and mobile handset, please try the following: Ensure your headset is turned off and is properly charged. Ensure the headset is paired with your mobile handset. Ensure your mobile handset’s Bluetooth feature is activated. Please refer to your mobile handset user guide for specific instruction.
www.tuv.com Page 15 Product Specifications Bluetooth Specification: Version 1.2 Class 2 Bluetooth Profile Supported: Headset and Hands free Range of Frequency: 2.4GHz Spectrum Dimensions: mm (L) xmm (W) xmm (H) Nominal Charging Time: Within 3 hours Talk Time*: Up to 7 hours Standby Time*: Up to 300 hours Weight: 14.2 grams *may vary due to users’ operation mode and mobile phone settings Test Report No.
www.tuv.com (Back Cover) © 2005 Hutchison Harbour Ring Enterprises Limited All rights in this publication are reserved and no part may be reproduced without the prior written permission of the publisher. The contents of this publication are believed to be correct at the time of going to press, but any information, specifications, products or services mentioned may be modified, supplemented or withdrawn without further notice. The Stylized i.