User's Manual

www.tuv.com
Test Report No.: 14010504 001 Appendix 4 page 21 of 27
Page 10
Using Your Headset
Voice Dialling from Your Headset
If your mobile handset is equipped with a voice dialling function, simply press the MFB on your headset and
when you hear a beep, say the voice tag.
IMPORTANT Please make sure to record voice tag into the mobile handset first before using voice
dialling function.
Last Number Redialling from Your Headset
Press the MFB on your headset twice.
IMPORTANT The above functions are only applicable to mobile handsets with Bluetooth Handsfree
Profile. Functionality varies depending on the mobile handset model you have. Please refer to your
mobile handset user guide for additional information.
Resetting / Removing the Pairing
You may want to reset the headset to its original settings. This also clears all current pairings.
1. Ensure the headset is OFF.
2. Press and hold the Volume Key until the LED alternately flashes blue and red rapidly.
3. Release the Volume Key.
4. Press and hold the Volume Key again until you hear 2 beeps.
5. Recharge the headset for a few seconds