User's Manual

www.tuv.com
Test Report No.: 14010504 001 Appendix 4 page 16 of 27
Page 3
Charging Your Headset
Fig. 4
The Headset comes with a built-in rechargeable battery. Prior to using the headset, it is recommendable to
charge the battery fully for the first time.
Page 5
Charging Your Headset
Connect the charger to an AC wall outlet then plug into the Charger Adaptor and then go to the headset’s
charging socket (fig.4). The LED will be red while charging.
IMPORTANT Charging indication will be delayed for a few seconds if the headset has not been used for
a long time or the battery is drained.
Nominal Charging Time
Charging the battery fully is normally within 3 hours. When the battery is fully charged, the LED will turn blue
and remains on for 30 minutes. Disconnect the charger from AC wall outlet and the headset. Press and hold the
MFB (fig.1) for 2 seconds to turn the headset on, please refer to “Turning Your Headset On and Off” on the next
page.
Talk & Standby Time
The fully charged battery offers up to 6 hours talk time and up to 150 hours standby time. When no calls are in
progress, the headset remains turned on in standby mode.
Low Battery
When the headset is on and the battery becomes low, the LED flashes red and the headset emits a beep every
1 minute. Please recharge the battery as described above.