User's Manual

www.tuv.com
Test Report No.: 14010504 001 Appendix 4 page 19 of 27
Page 8
Pairing Your Headset
1. Place the headset and the mobile handset where they are easily viewable by no more than 1 meter apart.
2. Ensure the headset is OFF.
3. Press and hold the MFB until the headset LED alternately flashes blue and red.
4. Activate your mobile handset’s Bluetooth function by referring to your mobile handset user guide for details.
5. Set the mobile handset to search for Bluetooth devices within about 1 meter as instructed in the mobile
handset user guide and select “BT HEADSET SAGEM H2” from the list.
6. Enter the preprogrammed passkey “0000” and press “OK” to pair your headset and mobile handset. When
the pairing is complete, the headset LED will flash blue rapidly for 5 times followed by a long beep.
7. Go back to your mobile handset’s main menu. For certain mobile handset models, a headset icon will be
shown on the screen. You should now be able to make and receive calls using your headset.
IMPORTANT If the pairing cannot be completed within 2 minutes while the pairing mode is activated, the
headset LED flashes purple red with 3 beeps and the headset is turned off. Please repeat Steps 2 to 7 to
pair the headset and the mobile handset again.