User's Manual

Ringing tones

Setting the vibrator (depending on

model)

Using the scrolling keys, select one of the following

options: inactive vibrate, only vibrate, vibrate then ring.

Validate by pressing the righthand key .

Selecting silent mode (depending on

model)

If you want the ringing tone of your phone to be

replaced by the vibrator and the beeps to be

suppressed (except for the alarm tone), tick the box

and validate by pressing OK.

You can also activate/deactivate the silent mode by

holding down the

∗ ∗

∗ key.

This mode is indicated by the symbol on the screen.

Setting the beeps

Different controls are available:

Setting the keypad tones

Select the tone required using the scrolling arrows and

validate (press the righthand key ).

Wherever you require your calls to arrive

discreetly, you can use the vibrator or

select the silent mode.

Silent mode is automatically

deactivated when the hands free car kit

is connected as well as when the

phone is switched on/off.

You can select the tones produced by

your keypad: Beep, DTMF (musical

keys) or non active tones (in this last

case, when you press your keyboard, it

does not make a noise).

myX-1a twin PCS_en_07ringtones.pmd 23/06/2004, 10:5054