User's Manual

70
WAP
Configuration of parameters
Advanced... menu: access to sub-menus:
• Connection settings which allow you to set the
parameters for several access providers (depending
on model). The current access service has a star in
front of it.
Configuration of WAP and GPRS parameters
- Select the desired access service using the scrolling
arrows then press on Modify (lefthand key ).
- Enter the name of the service then validate.
- Enter the internet address of the home page then
validate.
- Enter the Preferred connection settings:
GSM if not GPRS (default): the connection to the
WAP services accords priority to use of the GPRS
network. Nevertheless, in the event of unavailability
of the GPRS network, then the GSM network is used
in order to establish the connection.
GPRS: the connection to the WAP services uses the
GPRS network only. In the event of unavailability of
the GPRS network however, a message indicating
“network unavailable” appears, and then the
connection will not be possible.
GSM: the connection to the WAP services uses the
GSM network only.
All of the information to be entered in the
settings is supplied by your operator or
service provider.
MYX-3p_EN-11WAP.p65 19/12/2002, 15:2470