User Manual

23
The following steps provide detailed instructions on using T9 input mode:
1. Press and hold the Asterisk key (
*
), and select English from the pop-up menu. The T9
indicator appears at the top of the display.
2. Enter letters by pressing the keys on which the letters appear. Press a key only once for
each letter.
3. Press the Pound key (#) to accept the word and enter a space after it, or push the
Navigation up/down to scroll through the available words.
4. If you do not see the correct word, erase the word. Then press and hold the Asterisk key
(
*
), select ABC from the pop-up menu to change to Multipress mode, and manually enter
the word.
| NOTE}
 T9 cannot always find the word you want in the T9 dictionary; in these cases,
change to Multipress mode. After you have entered the word in Multipress
mode, the word will be added to the T9 dictionary.
 End User is granted no rights of ownership or any other proprietary rights in or
to the Documentation and Tegic Product or any other software or technology of
Tegic. End User acknowledges that all ownership of and proprietary rights in
and to the Documentation and Tegic Product are vested in Tegic. End User
shall not modify, reverse engineer, decompile or disassemble the Tegic
Product, or otherwise attempt to obtain source code for the Tegic Product. The
Documentation and Tegic Product are protected by the copyright laws of the
United States and international copyright treaties.
Entering Numbers in Numeric Mode
You can enter numbers by using Numeric mode. If you need to enter a number within a line of
text, you can change to Numeric mode (
) by pressing and holding the Asterisk key (
*
),
and then selecting 123 from the pop-up menu to enter the number, and then change back to
Multipress or T9 mode to finish entering the text.
| NOTE}
 If a field permits a numeric entry only, such as the Work phone field in
Contacts, the input mode automatically defaults to Numeric mode.