User Manual

56
To create a GPRS connection:
Your Smartphone comes with customized GPRS connection settings for you to select. If you
want to manually set up a connection, follow this procedure:
1. Obtain the following information from your service provider: the APN (Access Point
Node) name and DNS (Domain Name Servers) name (if required).
2. On the Home screen, press the Start soft key, and select Settings  Data Connections.
3. Press the Menu soft key and select Edit Connections.
4. Select GPRS Connections.
5. Press the Menu soft key and select Add.
6. Enter the requested information as follows:
• In Description, enter a name for the connection.
• In Connects to, scroll to the type of network to which you will connect.
• In Access point, enter the information provided by your system administrator.
• In User name, enter your user name for the GPRS network.
• In Password, enter your password.
• In Primary DNS, enter the primary domain naming system (DNS) address, as
provided by your network administrator.
• In Secondary DNS, enter the secondary DNS address, as provided by your system
administrator.
• In IP address, enter the Internet Protocol (IP) address, as provided by your system
administrator.
7. Press the Done soft key.
To connect to the Internet with a GPRS connection:
1. On the Home screen, press the Start soft key, and select Settings  Data Connections.
2. In Internet Connection, select the GPRS you want to use and select Done.
When you open a program that connects to the Internet, the Smartphone uses this connection.
The
icon indicates that GPRS is being used; you can press the End key to
temporarily stop the GPRS connection.