Operation Manual

33
3 3
OR
Remove the worn ink ribbon from its housing.
Position the ink ribbon over its housing under the rear cover
Insert the ink ribbon without removing the adhesive strip (2):
• position the right end of the main roller onto the retractable axis.
• position the left end of the main roller onto the left axis.
4 4
OR
Pull off the adhesive strip (2) from the ink ribbon .
5 5
OR
Insert the small roller in its housing: check that the gear axis (3) is correctly positioned in the slot (4), and that the
other axis (5) is also correctly positioned (6) in the slot.
2
2
2
2
6
5
4
3
6
5
4
3
Liasse 23228000-2 A (T).book Page 33 Jeudi, 5. août 1999 9:26 09