Operation Manual

D16T/D18T/D21T
- 9 -
3. A confirmation screen appears.
- If you do not wish to delete the entry, press
.
- To delete the entry, press
key.
The entry is deleted from the phonebook. You will hear a confirmation tone.
Note !
If you enter the wrong digits press C key to delete the incorrect digits.
Note !
To delete the entire phonebook list, select "delete all", press .
A confirmation screen appears:
- If you do not wish to delete the entry, press
.
- To delete the entry, press
key.
the entire phonebook are deleted.
You will hear a confirmation tone.
5.5. Assign a shortcut
This menu allows you to record two quick dial numbers assigned to the keys 1 and 2 on the
keyboard.
Note !
Your voice mail number is not factory set and you can assign it to the key .
1. Press
, "phonebook " appears on the screen. Press .
2. Using the or  key, select "direct mem.". Press
.
3. Using the  or  keys, select the key you want to assign a number (1 or 2) to and press
, "no number" is displayed on the screen. Press .
4. "edit " appears on the screen, Press
.
5. You will then enter the name input screen. Enter the name of the entry and press
to
confirm.
6. You will then enter the number screen. Enter the number of the entry. press
to confirm.
You will hear a confirmation tone.
5.5.1. Calling an abbreviated number
To call the number you have assigned to one of the shortcut keys:
1. Hold down the key on which the number was programmed (1 or 2).
2. The number is displayed on the screen and is automatically dialled.
5.6. Inserting a pause
You can insert a pause in the dialling sequence. Wait for a dial tone before you press . The
pause time is fixed to 3 seconds.
Press and hold
key during edit mode to inset the pause. The display shows an ’’P’’.
LU EN final.fm Page 9 Mardi, 23. juin 2009 10:39 10