Operation Manual

English
- 14 -
8.3. Alarm clock
To set the date and time :
1. Press
, select "clock&alarm" using the or key, Press .
2. Using the or key, select "alarm". Press
.
3. To activate the alarm once, select "on once ".
4. To repeat the alarm each day at the programmed time, select "on daily ".
5. To deactivate the alarm, select "off ".
6. Select your choice then press
:
Use the touch tone pad to enter the current alarm time. Enter minutes first (format
is HH:MM).
(If, after entering the time, the time format is 12H, use the key to set
aM
and the key to
set
pM
).
7. Press
key to confirm your selection. You will hear a confirmation tone.
8.4. Modifying alarm tone
1. Press , select "clock&alarm" using the or key, Press .
2. Using the or key, select "alarm tone". Press
.
3 melodies are available : "melody 1", "melody 2" and " melody 3".
3. Select the desired melody.
4. Press
key to confirm your selection. You will hear a confirmation tone.
9. Advanced settings
9.1.
Base master PIN code
Your base station code (default setting 0000) is required to access certain security functions.
This code can include 8 digits.
1. Press
.
Select "advanced set" using the or key, press
.
2. "change pin " appears on the screen. Press
.
The base station code entry screen is displayed.
3. Enter your old code first. Each time a digit is entered the «_» is replaced by a «*».
Press
to confirm.
4. Enter your new PIN code. Each time a digit is entered the «_» is replaced by a «*».
5. Press
key to confirm your selection. You will hear a confirmation tone.
Note !
Carefully note your base station code. You will need it to change certain settings.
LU EN final.fm Page 14 Mardi, 23. juin 2009 10:39 10