Operation Manual

29
ANSWERING MACHINE
If you want to change the announcement,
hold down the key until you hear a
beep.
You will hear the following message:
RECORD YOUR ANNOUNCEMENT
AFTER THE BEEP.
Speak clearly and close to the base to record
your announcement.
At the end of your announcement, press
the key.
Your announcement is played back
automatically.
Your recording answering machine is now
active. The number of messages is shown on
the display.
If you make a mistake while recording the
announcement, repeat the operations
described above until you are satisfied with
your announcement.
Returning to the pre-recorded
announcement
Press the key.
Repeatedly press the key until "o1" is
shown on the base display.
You will hear the following message: PRESS
OK TO ACTIVATE RECORDING MODE.
Press the key. The current
announcement is played back.
If you want to return to the pre-recorded
announcement, hold down the key
until you hear a beep.
STOP
MENU
You will hear the following message:
RECORD YOUR ANNOUNCEMENT
MESSAGE AFTER THE BEEP.
Press the key immediately after the
beep.
The pre-recorded (default) announcement is
now active again.
Creating your personal
announcement for the basic
answering machine
Press the key.
Repeatedly press the key until "o2" is
shown on the base display.
Press the key. The current
announcement is played back.
If you want to change the announcement,
hold down the key until you hear a
beep.
You will hear the following message:
RECORD YOUR ANNOUNCEMENT
MESSAGE AFTER THE BEEP.
Speak clearly and close to the base to record
your announcement.
At the end of your announcement, press
the key.
Your announcement is played back
automatically.
Your basic answering machine is now active.
"oo" is shown on the display.
STOP
MENU
STOP
LU 252117222C_D20V_EN.book Page 29 Mercredi, 24. août 2005 11:46 11