User manual

- 25 -
To stop a recording, return to the channel being recorded, and press the key.
10-2 RECORDING PROGRAMMES USING THE MENU
The Recording timers menu enables you to programme your recordings with 2 methods:
- manually programmation, with the options and the frequency of your choice;
- by automatic search of the recording programme, with the category or the title of the programme.
10-2-1 Manually programmation
Press the key to access the main menu. Select RECORDING TIMERS then press .
Select a blank line by using the or keys then press .
A screen is displayed in which you can
programme your recordings.
- Enter the channel number which you wish to
record.
- Select the frequency of recording:
- SINGLE: only once at the scheduled time.
- WEEKLY: once a week at the scheduled
time.
- DAILY (MON-FRI): at the scheduled time,
every day from Monday to Friday and
every week.
- DAILY (MON-SAT): at the scheduled
time, every day from Monday to Saturday
and every week.
- DAILY (MON-SUN): at the scheduled time, every day and every week.
- Enter the recording start date.
- Enter the time to start and end the recording.
- If you wish to limit the access to this recording, activate locking (see “Recording list”, page 28).
Confirm the programming by pressing .
To modify a recording, see “Managing the recording programmes”, page 26.
By pressing several times the key, you can select a recording time in
30-minute steps with a maximum duration of 4 hours (depending on software
version). You can then switch off the receiver: the recording will stop
automatically at the end of the programmed time.
When you record in deferred mode, the receiver can add a few seconds of
video at the beginning of the recording.
Once a recording is launched, you can no longer rewind before the start time
of the recording.
DTR6400T_6700T_9 avril 07 EN.book Page 25 Jeudi, 10. avril 2008 2:38 14