User manual

- 33 -
10-5-11 Erasing a portion of a recording
The receiver comprises an advanced editing function that enables you to:
- erase a portion of a recording from the beginning to a point that you specify manually,
- erase the portion of a recording between two points that you specify,
- erase the portion of a recording between the current playing position to the end of the recording,
- cut a recording into two parts.
Select, in the recording list, the recording to edit and press to commence playing.
At the desired position, press the key to pause.
Press the key then press the key to access the cutting options.
Select the desired cut option then press :
- at the beginning: the recorded portion
between the beginning and the selected point
will be erased (2 minutes minimum).
- in the middle: the part of the recording
between the selected point (index) and the
next selected position will be erased.
To choose the next position: confirm the "in
the middle" option by pressing , move
within the recording with the keys and
and press to mark the second
position.
Press then and again confirm the
cut option "in the middle" to cut the selected portion.
- at the end: the part of the recording between the selected point and the end will be erased.
- in two parts: the selected recording is cut into two parts called "1 recording name" and "2 recording
name".
10-6 SAVE A RECORDING ON ANOTHER EQUIPMENT
Connect your video recorder on the AUX Scart socket of the receiver (see “Peripheral connections”,
page 9).
Select this input on your video recorder.
Select play mode on the receiver and record mode on the video recorder.
Refer to the video recorder instruction manual for details on the procedure to follow.
Attention, such copying is legal only if it is intended for a strictly private use
.
DTR6400T_6700T_9 avril 07 EN.book Page 33 Jeudi, 10. avril 2008 2:38 14