User manual

4.TRANSMISSION REPORT CODES

The result of each transmission is given by the logs (transmission/reception) and by the communication

report.

In the case of an incident, the result is a code whose significance is given below:

PHONEFAX COMMUNICATION ERROR CODES

Code 01 - Your correspondent does not reply

Call later.

Code 02- The number called is suspect, as no fax replies

Check the number of your correspondent.

Code 03 - STOP

You have pressed STOP during the communication.

Code 04 - Invalid abbreviated number

Check the number.

Code 05 - Document feeder incident during the communication

Document jam or document feeder failure.

Code 07 - Incident in the functioning of the remote terminal or the line

Restart communication.

Code 08 - The document which you have transmitted may have been badly received

Replace it. Check with your correspondent.

Code 0A - Retrieve

You have tried to retrieve a document when the remote terminal has no document deposited.

Code 0B - Difference between the number of pages defined for transmission and the number of

pages sent

Check the number of pages.

Code 13 - Memory full

Fax reception made impossible.

Code 17 - Your machine is in protected access mode

A correspondent tried to call you and did not have your password.

Code 23 - Mailbox unknown, n°

The mailbox number which you have indicated is unknown in the machine of your correspondent.

INTERNET COMMUNICATION ERROR CODES

Codes 40 and 41: No ISP reply

The modem cannot connect to the Internet service provider. If the error occurs systematically, check the

supplier’s dial-up number.

Code 42 - Cannot connect to Internet service provider

The service provider refuses the connection, the service is temporarily unavailable. If the error occurs

systematically, check the Internet connection parameters.

Liasse2_23227944-0.p65 07/06/2000, 11:4843