QIG 253271827A Fast 1704_GB without WPS.book Page 1 Mercredi, 7.
QIG 253271827A Fast 1704_GB without WPS.book Page 1 Mercredi, 7. octobre 2009 2:47 14 SAGEM F@stTM 1704 Sagem Communications SAS (hereafter referred to as Sagem Communications) thanks you for choosing the range of SAGEM F@stTM 1704 routers while hoping that it will provide you with full satisfaction. SAGEM F@stTM 1704 products adapt the ADSL function respectively on POTS (ITU G.992.1/3/5 Appendix A) and on ISDN (ITU G.992.1/3/5 - Appendix B).
QIG 253271827A Fast 1704_GB without WPS.book Page 2 Mercredi, 7. octobre 2009 2:47 14 SAGEM F@stTM 1704 Contents 1. Contents of the pack ...................................................................................... 3 2. Safety instructions ......................................................................................... 4 2.1. Power supply source ............................................................................................................. 4 2.2. Location conditions .....
QIG 253271827A Fast 1704_GB without WPS.book Page 3 Mercredi, 7. octobre 2009 2:47 14 SAGEM F@stTM 1704 1.
QIG 253271827A Fast 1704_GB without WPS.book Page 4 Mercredi, 7. octobre 2009 2:47 14 SAGEM F@stTM 1704 2. Safety instructions Power supply source • Do not cover the router’s mains adapter. • The router comes with its own mains adapter. Do not use another adapter. • This class II adapter does not need to be grounded (earthed). The connection to the electrical network should comply with the indications given on the label. • Use a readily accessible mains outlet located near the router.
QIG 253271827A Fast 1704_GB without WPS.book Page 5 Mercredi, 7. octobre 2009 2:47 14 SAGEM F@stTM 1704 3. Connection Connecting your router Important Make sure that the router is not connected to your computer before you start the installation from the CD-ROM. Make the connections as shown in the diagram below. Line le ca b Note A "UK" mains adapter can be provided in option according to the customer. Connecting additional telephones Make the connections as shown in the diagram below.
QIG 253271827A Fast 1704_GB without WPS.book Page 6 Mercredi, 7. octobre 2009 2:47 14 SAGEM F@stTM 1704 4. Installation from the CD-ROM Installation by Wi-Fi interface Important Make sure that the router is not connected to your computer before you start the installation from the CDROM. 1. You selected the Wireless interface (Wi-Fi), click on Next. 2. Select the wireless connection mode (Wi-Fi). Note The installation procedure described below was undertaken in Windows VistaTM.
QIG 253271827A Fast 1704_GB without WPS.book Page 7 Mercredi, 7. octobre 2009 2:47 14 SAGEM F@stTM 1704 2. The Internet connection screen appears. Enter your connection ID and password, then click on Next. Note The Wi-Fi security key field only appears if a Wi-Fi security (WEP 128, WPA-PSK and WPA2-PSK) is assigned to your router. The length of this field depends on the selected security. The Wi-Fi information is marked on your router. 3. Once you have filled in the Wi-Fi parameters, click on Next. 4.
QIG 253271827A Fast 1704_GB without WPS.book Page 8 Mercredi, 7. octobre 2009 2:47 14 SAGEM F@stTM 1704 Installation of the Ethernet port 1. You selected the Use the Ethernet cable, click on Next. 2. Follow the instructions displayed on screen by plugging in the router supply, switching it on and connecting the ADSL line, then connect your computer to one of the four Ethernet sockets (LAN1 to LAN4) of the router by using the Ethernet cable.
QIG 253271827A Fast 1704_GB without WPS.book Page 9 Mercredi, 7. octobre 2009 2:47 14 SAGEM F@stTM 1704 5.
QIG 253271827A Fast 1704_GB without WPS.book Page 10 Mercredi, 7. octobre 2009 2:47 14 SAGEM F@stTM 1704 Router supervision The HTTP configuration tool lets you configure and monitor the router remotely. To access the HTTP configuration tool: 1. Open your browser. 2. Enter the router’s IP address or enter the following URL: http://myrouter 3. In the login screen that appears, enter your username and password. Note This information is provided by your Internet Service Provider (ISP).
QIG 253271827A Fast 1704_GB without WPS.book Page 11 Mercredi, 7.
QIG 253271827A Fast 1704_GB without WPS.book Page 12 Mercredi, 7. octobre 2009 2:47 14 SAGEM F@stTM 1704 6. Advanced router configuration Use the HTTP configuration tool to access advanced router settings and configure your equipment according to your needs.
QIG 253271827A Fast 1704_GB without WPS.book Page 13 Mercredi, 7. octobre 2009 2:47 14 SAGEM F@stTM 1704 7. Troubleshooting Many sources of information are available to help you identify and resolve issues you may experience: • the LEDs on the front panel of the router (see Status of the LEDs on the front panel, page 9), • the HTTP configuration tool (see Router supervision, page 10). For step-by-step and advanced problem-solving procedures, use the Diagnostic tool available in the HTTP configuration tool.
QIG 253271827A Fast 1704_GB without WPS.book Page 14 Mercredi, 7. octobre 2009 2:47 14 SAGEM F@stTM 1704 Restarting your router To restart your router, use one of the following methods: • press the Power button located on the rear panel of the router, • click on the Reboot action of the HTTP configuration tool (see Router supervision, page 10).
253271827A Broadband & Residential Terminals Business Unit Headquarters: 250, route de l'Empereur 92500 Rueil-Malmaison - FRANCE www.sagem-communications.com Sagem Communications SAS All rights reserved. The information and specifications included are subject to change without prior notice. Sagem Communications tries to ensure that all information in this document is correct, but does not accept liability for error or omission. Non contractual document.
