Operation Manual

8 - Updating the application
Page 8-2 SAGEM F@st™ 1704 Reference Manual - 253272861-A
Sagem Communications SAS document. Reproduction and disclosure prohibited
You can update the firmware using one of the following methods:
• via HTTP
• via TR69 protocol
• automatically: the new firmware version download is performed automatically on starting up
the router.
Important
Throughout the download procedure (up to five minutes), you must:
• not power down the router,
• not disconnect from the ADSL line.
During the download, all the LEDs of your router light in turn except the
LED that stays on
steady.
When the download is finished, your router restarts automatically to the new firmware version.
Note
To check that the new version has been correctly downloaded, select in the
HTTP configuration tool the Device info menu; the Software version field
displays the last software version installed.
HTTP update
You can download the new firmware to update your router using the Management menu in the
HTTP configuration tool (see section 5).
TR69 protocol
Operators can use "TR69" protocol to upgrade the router's firmware from an HTTP or FTP
server.