Operation Manual

5 - Information / Configuration
Page 5-62 SAGEM F@st™ 1704 Reference Manual - 253272861-A
Sagem Communications SAS document. Reproduction and disclosure prohibited
5.7.8.1 Queue Config
Object: This menu is used to enable or disable QoS on an interface, and to configure QoS to
use policy maps attached to an interface.
• In the Advanced Setup menu, select Quality of Service then select Queue Config.
The following screen opens:
Field State
Name
Queue entry name
Key
Sequence number allocated by the system, incremented of a
unit to each addition of a QoS Queue.
Interface
Name of the network interface configured (8/35 for example).
Precedence
Priority allocated to "Queue Precedence" from 1 to 3.
DSL Latency
DSL Latency
PTM Priority
PTM priority
Enable
QoS enabled or disabled for this interface.
Note: This status can be amended starting from this window.