User manual

34 Chapter 7. PC Connection
Click in the Print menu on P to edit the
printer settings. You can set whether to print in letter or
landscape format and how many pages should be printed
on a single sheet. Change the print order to print the last
page of your document fi rst. A long document is then
output sorted; the fi rst page lies on top.
Scanning
Insert the document face down into the document feed
slot.  e lower most document is read into the memory
scanned. You can load up to 20 documents into the
paper tray.
e installation CD that is delivered with your fax ma-
chine contains the program P P 8.0. If you select
A P during the installation process, P
P will be installed on your computer along with the
C S. Start the program by clicking in the
start menu on the icon D M.
Click on the scan button or select F > S from the
menu bar.
Select the Twain Scanner Driver as your scanner. Se-
lect whether you would like to scan a document or a
photograph. Click on S.  e Twain Scanner Driver
window now opens.
¡
You can also start the scanning process from
any other graphics program if it is supported
by the Twain Driver. Select the Twain Scanner
Driver as your scanner.  e Twain Driver selection
window then appears, as described below.
If you select the controller on the upper right, a dialogue
appears in which you can select the alignment and fi lter
settings for the scan.
Using the controls beneath this, you can choose whether
to scan in the black-and-white mode (also called “bar-
code mode”) or in the grey tone mode.
Enter the desired resolution for the scanner under R-
.
Click on the lower button S S to commence with
the scanning process. After scanning, the document will
appear in the main window of P Pt. You can now
save it, edit it in a graphics program or process it with the
OCR (Optical Character Recognition) software.
¡
Under the menu item P-, you
can create diff erent profi les. In a profi le,
you may save settings that you would like to use
fairly often, for example, for scanning of a fre-
quently-used document-type. First confi gure all
the settings.  en click on N and enter a name
for the profi le. Click on S. To scan documents
with the saved settings, select this profi le from the
selection menu.