FLP 3000-X LCD Projector User's Manual SAGEM SA - Siège social : Le ponant de Paris - 27, rue Leblanc – 75512 PARIS CEDEX 15 - FRANCE Société anonyme à directoire et conseil de surveillance au capital de • 33 300 000 – 562 082 909 R.C.S.
© 2002 SAGEM SA. All rights reserved Reproduction is any manner whatsoever without the written permission of SAGEM SA is strictly forbidden. Informations in this document is subject to change without notice. Trademarks used in this user-guide: SAGEM and the SAGEM logo are trademarks of SAGEM SA ; Apple, Macintosh and PowerBook logo are trademarks of Apple Computer, Inc.
Contents Important Safety Notice...............................................................01 Accessories.................................................................................02 Parts of the Projector...................................................................03 Installation...................................................................................04 Connections................................................................................05 Basic Operation....................
IMPORTANT SAFETY NOTICE PRECAUTIONS Please read this manual carefully before using the projector and keep this manual handy for future reference. WARNING Do not expose this unit to rain or moisture to prevent fire or shock. Do not open the cabinet to avoid electrical shock. Refer all servicing to qualified service personnel. Handle the power cable carefully and avoid excessive bending. A damaged cable may cause electric shock or fire. CAUTION Do not look into the lens while the unit is operating.
ACCESSORIES COX-02 AC power cable (1.8m / 6.0ft) VGA cable (1.8 m / 6.0ft) Component YCbCr/YPbPr cable (1.8m / 6.0ft) Video cable (1.8m / 6.0ft) DVI cable (1.8m / 6.0ft) USB mouse cable (1.8m / 6.0ft) S-Video cable (1.8m / 6.0ft) Audio cable (1.8m / 6.
PARTS OF THE PROJECTOR Front, Side, and Top Speaker Zoom Ring * Control Panel and Indicators Focus Ring Power Lamp Temp Source Menu Remote Sensor ( Front ) Volume Keystone Esc Auto Lens Cover Enter Handle Lens Power Input Socket (AC IN) Adjuster Leg Main Power Switch Exhaust Vents Bottom Cooling Fans and Ventilation Slot Rear Remote Sensor ( Rear ) Adjuster Legs Air Filter * Connector Panel DVI-D Video Y RGB in 1 RGB out Cb/Pb S-Video Audio RGB in 2 Cr/Pr Rs232 Lamp Cove
INSTALLATION Ventilation Please read the important safety notice (p1) carefully before installation. * Please do not place any object near the ventilation slots of the projector within 30cm distance. Positioning * Please prevent any scraps or lint suck into ventilation slots or use the projector in the dusty environment. Please place the unit on a solid plat level surface. * Please do not operate the projector while the ambient temperature or the humidity is too high.
CONNECTIONS Connecting a computer or a notebook PC Desktop PC or Notebook PC DVI cable (Not supplied, optional) VGA cable (Accessory) Monitor VGA cable (Accessory) DVI-D Video Y RGB in 1 RGB out Cb/Pb S-Video Audio RGB in 2 Cr/Pr USB Rs232 Audio cable (Not supplied, optional) USB Mouse cable (Accessory) VGA cable (Accessory) Desktop PC or Notebook PC * You can use the remote control as the PC mouse.
Connecting video equipments Composite video images Composite video cable (Accessory) DVI-D Video Y L R Audio RGB in 1 VCR/VCD/DVD player Digital camcorder RGB out Cb/Pb S-Video Audio VIDEO RGB in 2 Cr/Pr USB Rs232 Audio cable (Accessory) * Connecting a VCR/VCD/DVD player, digital camcorder by using a composite video cable S-Video images S-Video cable (Not supplied, optional) DVI-D Video Y L R Audio RGB in 1 VCD/DVD player Digital camcorder RGB out Cb/Pb S-Video Audio RGB in 2 Cr/
Component images: YCbCr/YPbPr Component YCbCr/YPbPr cable (Not supplied, optional) DVI-D Video Y L R Audio RGB in 1 Cb/Pb Cr/Pr DVD player RGB out Cb/Pb Y S-Video Audio RGB in 2 Cr/Pr Rs232 USB Audio cable (Accessory) * Connecting a DVD player by using a component video cable (YCbCr/YPbPr) 7
BASIC OPERATION Power On 1. Remove the lens cover. 2. Connect a computer or video equipment to the projector. 3. Connect the power cord, and turn on the MAIN POWER switch. The three indicators will flash once together, and the POWER indicator will light RED. 4. Press the POWER button. The POWER indicator will flash GREEN for a while, and then light steadily. 5. Turn on the connected input source. 6. Press the SOURCE button to select the input signal.
Adjustment Projection Angle Lift the projector and press the adjuster buttons to adjust the projection angle. Then, release the buttons to lock the extended adjuster legs. You can turn the bases of the adjuster legs to adjust the angle slightly. Adjuster Button up down Adjuster Legs Image Size & Focus Turn the focus/zoom ring to adjust the image focus and size.
Power Off 1. Press the POWER button twice to turn off the power. To prevent mis-operation, a confirmation message appears when POWER is pressed once. The power turns off when you press the button once more. The lamp will turn off and the cooling fan will keep running. The POWER indicator will flash GREEN for 60 sec. 2. Wait until the POWER indicator lights RED steadily (until the cooling fan stops). Be careful not to cut power to the projector while the cooling fan is still running. 3.
USING THE REMOTE CONTROL General Function Keys POWER POWER SOURCE MENU ESC U SOURCE LASER MENU ESC U ENTER LASER ENTER R L R L L R AUTO - SOURCE: selecting the input source manually such as VGA (connecting computer), Video, S-Video, DVI, YCbCr, or HDTV (YPbPr). - MENU: On-Screen Display menu (OSD) and adjust the picture elements. Using "ENTER" button to enter OSD components or using "ESC" to cancel OSD. - LASER: pressing the button to use the remote control as a laser pointer.
MENU OPERATION (OSD) You can use the ON-SCREEN MENU to make various adjustments and settings. 1. Press the MENU button to display the On-screen Menu. 2. Use to select a main menu item, and then press to enter the selected sub-menu. 3. Use to select a sub-menu item, and then press to enter an individual adjustment screen or the next menu level. 4. Use to adjust the setting, and Input Source Main Menu Item YCbCr COLOR IMAGE BRIGHTNESS CONTRAST SHARPNESS POSITION SATURATION TINT 63 61 50 H. 0 69 50 V.
SETTING Sub-menu Function FREEZE Freeze animated image. SOURCE Select the input source. PIP MODE Display the images in the Picture-in-Picture mode. * PIP SIZE: Open or close the sub-screen and select its size. * PIP SOURCE: Select the input source of the sub-screen. * PIP POSITION: Select the position of the sub-screen. LANGUAGE Set the language for OSD. AUDIO Sub-menu Function VOLUME Adjust the volume. MUTE Mute the sound temporarily.
INSTALLATION Sub-menu Function IMAGE ASPECT Set the aspect ratio for projected images. KEYSTONE Correct the vertical or horizontal keystone distortion. ORIENTATION Make the projected images reverse vertically or horizontally according to the installation mode of the projector. USER'S LOGO Enable or disable the user's logo function. LOGO CAPTURE * LOGO BACKGROUND: Change the fill color behind the logo. * LOGO SCALING: Adjust the scale of the logo screen.
TROUBLESHOOTING (INDICATORS) You can check the status of the projector using the indicators on the projector's control panel. Refer to the table below for the cause of problems. : Lighting Status Power Lamp Temp Indicators : Flashing Cause & Remedy Standby condition Warm-up (40 sec) or Cool-down (60 sec) Projection The lamp cover or the air filter cover is detached. Attach the cover securely. The lamp operates abnormally. Contact the qualified service personnel. The fan is broken.
REPLACING THE LAMP UNIT 4. Hold the handle and pull the lamp cartridge up carefully to remove it. Under normal usage, the lamp life time of the projector is about 1500 hours. The output luminance will drop as lamp life diminishes. User can check the used lamp life status in the MANAGEMENT MENU of OSD. Change the lamp cartridge when the brightness is no more acceptable. User can consult qualified agent or manufacturer for model of lamp cartridge and purchase new ones for replacement.
SPECIFICATIONS OPTICAL Native Resolution Resolution Supported Brightness Display Technology Contrast Ratio Brightness Uniformity Lamp Life Lamp Power Lens Type F# Image Size Projection Range : : : : : : : : : : : : XGA (1024 x 768) VGA - SXGA 3000 Lumens (A975MP) 0.9" Poly-silicon LCD 400 : 1 >90% 1500 hours 250W Manual focus and zoom 1.7 ~ 2.
